Sunday, May 26, 2013
Antinoise protection of the car with his hands
The increased level of noise in the car, can ruin even a long trip, not to mention the long journey. Sure, you can turn the music louder, and thereby dampen the sound from the engine noise from the wheels at high speeds or annoying sound of rain, but much more reliable car to improve soundproofing. Antinoise materials used in the car, can not only absorb the noise that annoys, but are a good heat insulator. And most importantly, that such protection can do for yourself. You need to know on what areas need to work on sound insulation, what materials should be used and the sequence of works. The first thing to do is clean the areas that need to process of dirt and dust. It is also important not to install insulating materials on a layer of anticorrosive, can hurt the paint or primer the car. Except epoxy anticorrosive, who has a firm consistency. In any car door - a place that hosts the front speakers, and very often with the music vibrates the door. For surface treatment of the doors need to buy vibropoglotitel type Vibroplast M1 "or" Bimast. Purpose of vibration control materials is the localization of vibrations from the metal and plastic. Door, before the establishment of noise insulation and vibromaterialov, disassemble, degrease and paste vibroplast. The next thing to do is handle the cage door. In order to handle the paneling, all joints treated with sealant, and in some places, use vibropoglotitel. On the inside of the door skin tag on the cushioning material. In the same way the body is treated with the sidewall. Important and more difficult to antinoise processing - processing of the floor, walls and engine compartment. In this case, it is advisable to use a maximum thickness of the sound absorber. Not interfere with glue on the inside of the lining cushioning. In the same way to handle the sidewall body. The most difficult in antinoise processing, processing the vehicle floor and walls engine compartment. It is advisable to use a sound absorber with a maximum thickness. In order to provide sound insulation ceiling to increase the rigidity of the panel, but it is very important in this case that the ceiling was not too massive. In this case, using lightweight materials such as: polystyrene foam, or perforated steel profile. The last thing you need to take - is to make noise insulation boot .. To do this, on the side of the trunk establish similar protection panels of doors, on the floor luggage fit viropoglotitel and noise absorbing layer placed on top. Through such actions are not complicated, you can make the trip in the car more comfortable and quiet.
