Tuesday, May 28, 2013
How to remove the VAZ 2110 gearbox
Removing the gearbox from your vehicle should be conducted in an observation well or use a lift. In the first step is to remove the splash from your engine. The next step is to disconnect the traction motor, as well as reactive thrust from the gearbox. Following the action must be from the gearbox to drain oil. Next, remove the bottom cover of the crater clutch by loosening the three mounting bolts, for this we use a special key "to 10". Withdrawals should be made of the right front wheel drive, replacing the hole in the gearbox plug of wood, or you can apply for this small piece of rubber hose. After take off the left front wheel drive. Unclip the clutch of the gearbox. Further need to disconnect the battery lead battery with a minus sign and remove the starter. After you disconnect wires from the light switch reverse, with the disconnect speed sensor. Remove ring by unscrewing the nut key "to 17". Unlinked left footing the power unit, this engine is put under stress. Unlinked from the crater of the clutch cylinder, turning the key 19 three bolts. Then remove the gearbox from the engine. In the future installation of transmission should be performed in reverse order.
