New Cars Specification

1. The road surface dry. Consider a few situations the use of fur. boxes in dry weather. If you are moving along the main road and you need to make a turn, in this case, you should gradually slow down. Do not use the gearbox to slow the car by shifting from high to lower. Also prohibited from turning on the clutch depressed, as the machine begins to accelerate. If you make a complete halt at the turning machine, you will need to squeeze the clutch, turn the first gear and continue on the route you want. 2. When a slippery road. During the ice is usually a lot of accidents. Describe how to avoid it. During the ice you should not assume that the car would lose traction. To do this, you should feel the car is good and as stated in the driver's quarters "to let her tightness. You should not move quickly and keep your distance for the traveling vehicle. Trogatsya should be covered with ice by about towing clutch. Release the clutch slowly until the car begins to move. While driving on slippery roads you have to remember not to make sudden braking because the car can bring, and you'll create a traffic hazard on the road. For safety, braking, use the gearbox by switching from high to low gear. Squeeze the clutch switch on low gear, release the clutch - a way to warn you away from drifting, as the wheels are not locked and the slow progress in the people call it "stop the engine." Such a braking system used on foreign cars «ABS», but domestic machines are not equipped with such a system. If you're stuck in the snow, use the build-up, forward - backward. 3. When going up and down the mountain. While climbing the mountain, use low gear, the minimum speed will save you from the exit of the mountain back. When you touch the hill then you need to squeeze the clutch, turn the first gear and release the brake pedal with the gas releasing the clutch. Then you are not rolled back. If you are afraid to die when touching up the hill, you better give more gas. Downhill in icy conditions better at lower speed, that there were no skid. And that the vehicle had not accelerated during the descent of the mountain, use the brake pedal.

Removing the gearbox from your vehicle should be conducted in an observation well or use a lift. In the first step is to remove the splash from your engine. The next step is to disconnect the traction motor, as well as reactive thrust from the gearbox. Following the action must be from the gearbox to drain oil. Next, remove the bottom cover of the crater clutch by loosening the three mounting bolts, for this we use a special key "to 10". Withdrawals should be made of the right front wheel drive, replacing the hole in the gearbox plug of wood, or you can apply for this small piece of rubber hose. After take off the left front wheel drive. Unclip the clutch of the gearbox. Further need to disconnect the battery lead battery with a minus sign and remove the starter. After you disconnect wires from the light switch reverse, with the disconnect speed sensor. Remove ring by unscrewing the nut key "to 17". Unlinked left footing the power unit, this engine is put under stress. Unlinked from the crater of the clutch cylinder, turning the key 19 three bolts. Then remove the gearbox from the engine. In the future installation of transmission should be performed in reverse order.